Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Installation for Pembroke Pines Homeowners
If your garage door is bent, rusted through at the bottom section, or an opener keeps reversing on a door that no longer runs true, replacement usually costs less than chasing the problem one panel at a time. We handle full Pembroke Pines Garage Door Repair Co work on doors and openers, and installation is a big part of it: measuring, ordering the right door for your opening, and setting the whole system up so it runs quietly for years. Our technicians have up to 11 years of experience, and we work on the brand you already own, from Craftsman to Raynor.
One thing we’re clear about: installation isn’t a same-day job. A new door has to be measured, ordered to your opening’s size and then scheduled, so we promise a free measure and a written price instead of a same-day arrival. Call (855) 529-2078 to set that up. Emergency repairs are a separate matter, and we do offer emergency garage door service for doors that fail suddenly.
Key Takeaways
- New door installation in Pembroke Pines typically runs $700 – $2,200 installed, depending on size, material and hardware.
- Installation is measured and scheduled, never a same-day promise. You get a free measure and a written quote first.
- We install single car, double car, steel, wood and custom doors, and we service the opener alongside the door.
- Our technicians have up to 11 years of experience across eight major brands, so we know the tolerances each door and opener was built to.
- The price is quoted and agreed before any work starts, and the written estimate sets the final price.
What Our Garage Door Installation Service Includes
Every installation starts with the opening itself: the header, the jambs, the floor line and how much headroom and side room the door has to work with. From there we match the door type to how you actually use the garage. Most Pembroke Pines homes have the garage as the main way in and out, which changes what matters. A door that binds or a torsion system under the wrong load wears out fast when it runs several times a day.
New Door Installation
A full new door installation means removing the old door and its hardware and fitting a complete system: panels, tracks, rollers, hinges, springs and the opener connection. You need it when the door structure has failed, when sections are no longer made for your model, or when a repair would cost nearly as much as a replacement. We measure the opening, confirm the spring is rated for the new door’s weight, and set the travel limits and safety reverse on the opener before we call the job done.

Single Car Door
A single car door covers a standard one-car opening, usually in the 8 to 9 foot width range, and it’s the most common replacement in the neighborhoods around Pembroke Pines. It makes sense when one bay’s door has taken the wear while the other is fine, so you’re not paying to replace a door that still has life in it. We size the springs to that door’s exact weight rather than reusing whatever was on the old one, which is where a lot of short-lived installations go wrong.

Double Car Door
A double car door spans a two-car opening, and that extra width changes the engineering: wider panels flex more, and the torsion system carries more load. You need one when a wide door has cracked at the center stile, when the tracks have spread, or when you’re replacing a builder-grade door that never ran smoothly. We check the header and jamb spacing before ordering, because a wide opening that’s out of square will make even a good door bind.

Custom Garage Door
A custom door is built to a non-standard opening, a specific look, or a window and panel layout you can’t buy off the shelf. Homeowners ask for these when an HOA or architectural style calls for something specific, or when the opening was framed to unusual dimensions. We take detailed measurements and talk through what’s realistic for your opening before anything is ordered, so you’re not committed to a door that won’t fit the way it should.
Steel Doors
Steel is the most common door material in South Florida because it holds up to humidity and sun without the upkeep wood needs. You’d choose steel for a low-maintenance door that insulates reasonably well and takes paint cleanly when you want to change the color. We look at gauge and insulation value when we quote, since a thin steel door and a heavier insulated one feel completely different in daily use and need different springs.
Wood Doors
Wood doors give you a look steel can’t match, and they suit homes where the garage face is part of the street view. They need more attention in this climate: humidity moves wood, so sealing and re-finishing matter more here than in drier parts of the country. We’ll tell you honestly when a wood door is the right call and when a wood-look steel door will serve you better for the maintenance you’re willing to do.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Installation
We install and service doors and openers from eight of the most recognized names in the industry, and that brand fluency is practical rather than decorative. With LiftMaster and Chamberlain openers, we know how the travel limits, force settings and safety reverse behave, and how to set them so the opener matches the new door instead of fighting it. Those two share a lot of engineering, so a homeowner moving from one to the other isn’t starting over.
On the door side, we work with Craftsman and Raynor among others, and we know where each one wears: which hinge points take the load, how the sections are joined, and what the manufacturer expects for spring tension. A Raynor door and a Craftsman door are not set up the same way, and treating them as interchangeable is how installations end up noisy or short-lived. Whether you have Craftsman, Raynor, LiftMaster, Chamberlain or any other make, we can help, and if you’re also weighing repair over replacement, our garage door installation page walks through what a new system actually involves.
Signs You Need Garage Door Installation Right Now
Repair is often the smarter spend. These are the signs that point toward replacement instead.
- The door is sagging or bowed across the middle. A door that dips in the center has lost structural stiffness, and no amount of adjustment fixes it. Left alone, the sag puts extra load on the springs and tracks and the problem spreads.
- Sections are cracked, rusted through, or no longer available. Once the panel you need is out of production, you’re patching a door that will keep failing. A replacement gets you back to a door with parts you can still buy.
- The door has come off the tracks or dropped suddenly. A door that jumps its tracks or falls is a safety issue, not a nuisance, and it usually means the structure or hardware has failed. Stop using the door and have it looked at before someone gets hurt.
- The opener is older than the door and can’t be adjusted to it. An opener that runs the door too hard or reverses for no reason is often mismatched to the door’s weight. When the opener and door can’t be brought into agreement, replacing the pair is cleaner than chasing adjustments.
- You’re repainting or re-siding and the garage face is the weak spot. If the rest of the exterior is getting refreshed and the door is the shabbiest thing left, that’s the moment to price a new one. Doing it alongside other exterior work saves you a second round of disruption.
Our Garage Door Installation Process – Step by Step
- 1
Free measure and walkthrough. We measure the opening’s width, height, headroom and side room, check the header and jambs for square, and look at the floor line. That last one matters: an uneven floor changes how the bottom seal sits and how the door closes. You get a written price from this visit.
- 2
Door and opener selection. We talk through material, insulation, window layout and budget, then recommend a door sized to your opening and rated for your spring. If your opener needs replacing too, we quote it in the same visit so you’re not dealing with two jobs.
- 3
Ordering and scheduling. The door is ordered to your measurements and we schedule installation once it’s in. This is the part people underestimate: custom and special-order doors take time, and we’d rather tell you that up front than promise a date that slips.
- 4
Removal and installation. On the day, we take out the old door and hardware, set the new tracks, hang the panels, and install the torsion system and rollers. Springs are wound to the door’s rated weight and the whole assembly is checked for plumb before the opener goes back on.
- 5
Opener setup and final testing. We set the opener’s travel limits and force, test the safety reverse, and run the door through several full cycles while you watch. We walk you through the balance and how the door should feel by hand, so you know what normal looks like.
A note on safety, because it’s the part worth repeating. Garage door springs and cables are under high tension and can cause serious injury if handled without the right tools and technique. We do that work as trained technicians and we don’t hand homeowners a how-to for it. If a spring or cable lets go, keep everyone clear of the door and call us.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Installation Cost in Pembroke Pines?
A typical new door installation in Pembroke Pines runs $700 – $2,200 installed, depending on door size, material and whether the opener is replaced at the same time. A single car steel door sits at the lower end of that range. A double car door, an insulated door, or a wood or custom door pushes toward the top.
| What you’re pricing | Typical estimated range |
|---|---|
| New door installation (single car, standard steel) | $700 – $2,200 |
| New door installation (double car, insulated) | $700 – $2,200 |
| Custom or wood door | $700 – $2,200 |
| Opener installation (if replacing the opener too) | $250 – $550 |
| Panel replacement (if only one section has failed) | $250 – $500 |
| Spring repair (one spring, if a spring fails after install) | $180 – $340 |
The $700 – $2,200 figure covers the door itself, tracks, springs, rollers, hinges and labor. Opener work is priced separately because not every replacement needs a new opener. Two doors with the same dimensions can land at different prices: insulation, window inserts, gauge of steel and the finish all move the number. A matched spring pair, if one is needed later, costs about twice the single-spring range.
The way to avoid overpaying is to get the written estimate before anything is ordered, and to ask what’s included in it. Ours spells out the door, the hardware and the labor, and the price is quoted and agreed before any work starts. The written estimate sets the final price, so you’re not guessing at what the invoice will look like.
Garage Door Installation Near Pembroke Pines – Our Service Area
We install garage doors across Pembroke Pines and the cities around it, including Miramar, Southwest Ranches, Cooper City, Davie, Weston, Plantation, Country Club, Palm Springs North, Miami Lakes, Miami Gardens and Hialeah Gardens. Measure appointments are booked in advance for these areas, and we’ll tell you the soonest opening when you call. Neighboring homeowners can see the same service on our garage door installation and garage door installation pages.
Serving Pembroke Pines, FL – Our Local Coverage Area
We serve Pembroke Pines and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Installation in Pembroke Pines
Garage door installation is the full replacement of a door system: the panels, tracks, rollers, hinges, springs and the connection to the opener. It’s different from repair, which fixes one component, because the whole assembly is matched to your opening and the spring is rated to the new door’s weight. We measure the opening first, then order and install a door sized to it.
The install itself usually takes a few hours once the door is on site, but the total timeline depends mostly on ordering. A standard door that’s in stock can be scheduled soon after your measure. A custom or special-order door takes longer, and we’ll give you a realistic window at the estimate rather than a date that slips. Call (855) 529-2078 to get the measure on the calendar.
Typical estimated installation in Pembroke Pines runs $700 – $2,200, depending on door size, material and whether you replace the opener at the same time. A separate opener installation runs $250 – $550. We give you a free measure and a written estimate so the number is specific to your opening. Call (855) 529-2078 for an exact quote, and the written estimate sets the final price.
Yes, we service and install LiftMaster and Chamberlain openers, along with Genie, and we work with Clopay, Amarr, Wayne Dalton, Craftsman and Raynor doors. Brand experience makes a real difference because each opener has its own travel and force adjustment procedure. We set yours to the new door’s weight so it runs smoothly instead of straining.
Yes. Installation is a scheduled job, but if a door comes off its tracks, a spring snaps, or an opener quits, that’s an emergency repair rather than a replacement. We offer emergency garage door service for time-sensitive failures. Call us when it happens and we’ll get you booked as quickly as we can.
Our work is covered by a satisfaction guarantee, and the door manufacturer’s warranty applies to the door and its components. We’ll walk you through what each one covers at the estimate, since the terms differ by brand and model. Keep the paperwork we leave and call us if anything about the door’s operation changes.
Clear the garage floor and the driveway in front of the door, and move anything stored near the door’s tracks and springs. Make sure there’s room for a technician to work on both sides of the opening. If your opener has a keypad or remote, have it handy so we can re-pair it when we finish.
Schedule Your Garage Door Installation Service in Pembroke Pines Today
Ready to stop patching a failing door? Call (855) 529-2078 for a free measure and a no-obligation written estimate on a new door for your Pembroke Pines home. We’ll tell you what fits your opening and your budget, and quote the price before anything is ordered. The local pro is licensed and insured as their state requires, and our technicians have up to 11 years of experience.
Written by the team at Pembroke Pines Garage Door Repair Co.