Panel Replacement Cost in Pembroke Pines - Typical Price Ranges, Then Your Exact Quote

Typical price ranges for the work, then a free exact quote for your door. No call-out fee to find out where you land, and the price is agreed before work starts.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Schedule Free Estimate

Call to schedule your free estimate

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 Upfront Pricing · Free Estimates
Raised-panel steelRaised-panel steel
Carriage houseCarriage house
Modern flushModern flush
Full-view glassFull-view glass
LiftMaster openersLiftMaster openers
Chamberlain openersChamberlain openers
Every visit starts with

Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included

We have financing partners for your new garage door*On approved credit; ask us about your options

You get a price before we start. It does not change when the pro arrives.

Get your free estimate
Explore

Styles & brands we work with

  • Raised-panel steel
  • Carriage house
  • Modern flush
  • Full-view glass
  • LiftMaster openers
  • Chamberlain openers
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

How Much Does Panel Replacement Cost in Pembroke Pines?

Panel replacement in Pembroke Pines typically costs $250 – $500 for a standard single-panel job, including the panel, hardware transfer and labor. That estimate covers one damaged section on most residential doors; multi-panel damage, custom or discontinued profiles, and high-cycle doors push the figure toward the top of that range or beyond. The written estimate we provide before any work begins sets the final price.

Most of the doors we see in Pembroke Pines are sectional steel or aluminum, and a single bent bottom panel from a backed-out car is the usual reason a homeowner calls. Panel replacement is one of the few garage door jobs where you can often repair rather than replace, which is why the price range stays far below a new door. We connect you with independent local professionals who are licensed and insured as their state requires, and we can work with your insurer if a storm or collision claim is part of the picture. Call (855) 529-2078 for a free estimate.

Key Takeaways

  • Typical panel replacement in Pembroke Pines runs $250 – $500 for a standard single panel.
  • Bottom panels cost the most because they take the impact and carry the safety hardware.
  • Matched or discontinued panel profiles are the main reason a job lands at the high end.
  • A single damaged panel usually costs far less than replacing the whole door.
  • Free estimates and same-day service are available, with fast dispatch from 7am to 7pm.

Panel Replacement Cost Breakdown (2026)

Below are typical estimated ranges for the Pembroke Pines market in 2026. These are ranges, not quotes. The written estimate you receive sets the final price for your specific door.

Line item Typical estimated range
Single standard panel replacement (steel or aluminum) $250 – $500
Bottom panel (impact panel with reinforcement) $300 – $500
Two lower panels replaced together $450 – $800
Custom, matched or discontinued panel profile $400 – $700 and up
Garage door repair (panel included with other fixes) $150 – $600
Roller replacement (often done with a panel swap) $110 – $220
Track realignment (if the door came off its track) $120 – $240

What pushes a panel job toward the top of the range? Three things, mostly. First, the panel itself: a stock profile in a common color is the cheapest path, while a special order or a discontinued design that has to be matched can add time and cost. Second, what else got bent. A car that backs into a bottom panel often shifts a track, chips a roller or strains a hinge, and those get corrected to make the door run true again. Third, door size and cycle rating. A wider door takes a wider panel, and a high-cycle door needs a panel built to take more open-close cycles.

What keeps the price down? Catching it early. A dented panel that still runs normally is a straightforward swap. A dented panel on a door that has been forced up and down for months often turns into a panel plus a track and roller job. If you notice a hit, get it looked at before the damage spreads. Our technicians have up to 11 years of experience with doors and openers, and they can tell quickly whether you need one panel or several.

What Affects Panel Replacement Pricing in Pembroke Pines

  • Panel position. Bottom panels cost the most because they absorb the impact and carry the reinforcement and safety hardware. Middle and top panels are usually toward the lower end of the range.
  • Material and brand match. We work with Clopay, Amarr, Wayne Dalton, Raynor and other major brands, and matching an existing profile and color matters. A stock Clopay or Amarr panel is straightforward; an older Wayne Dalton or a discontinued line may need a special order or a close match, which adds cost.
  • Door style. A raised-panel steel door is the simplest to match. Carriage-house, glass-top or flush modern profiles cost more per panel and often need a longer lead time.
  • Hidden damage. When a panel is hit, the track, hinges, rollers or the opener can be stressed too. Most Pembroke Pines panel jobs are just a panel swap; some need a roller replacement or track realignment folded in, and that shows up in the estimate.
  • Humidity and daily use. Pembroke Pines summers are hot and humid, and the garage door opens and closes many times a day when it’s the main entry. That cycle count wears hardware faster, so a panel replacement is a good moment to check rollers and hinges while the door is down.
  • Access and door height. An eight-foot or taller door, or a narrow driveway that makes positioning equipment tricky, can add labor time compared with a standard seven-foot door.

One more factor that doesn’t show up on a price list but shapes the estimate: whether you want a single panel replaced or a set. When two or three panels are dented or faded unevenly, replacing them together often looks and runs better than chasing them one at a time, even though the per-job figure climbs. We’ll lay out both options so you can weigh cost against appearance.

How to Save on Panel Replacement

There isn’t a coupon in this trade that beats catching the problem early and choosing a stock panel. Here’s how homeowners in Pembroke Pines keep panel replacement costs down.

  • Deal with it while it’s still just a dent. A panel that still runs is a simple swap. Once the dented panel drags the track or strains the opener, you’re paying for a panel plus a track or opener repair.
  • Ask about stock profiles first. If a stock panel in your brand and color fits, you skip the special-order surcharge. We’ll tell you honestly when a match is easy and when it isn’t.
  • Bundle the small stuff. If your rollers are worn or a hinge is bent, combining it with the panel job is usually cheaper than booking two visits. Many panel replacements fall inside the broader garage door repair range of $150 – $600 once related fixes are included.
  • Get the free estimate before you decide. A written estimate tells you whether you’re looking at one panel or a whole door, and it costs nothing to find out. Call (855) 529-2078.
  • Weigh repair against replacement. A single panel on a sound door is almost always worth repairing. A door with several damaged panels and a tired opener can tip the math toward a new door installation at $700 – $2200.

None of this is about cutting corners on the panel itself. A cheap panel that doesn’t match the door’s balance and weight can make the opener work harder and shorten its life. The right part for your specific model is what keeps the whole door running, and that’s where the savings actually come from.

Can You Replace Just One Panel, or Do You Need the Whole Door?

You can usually replace just one panel. A single damaged section on an otherwise sound door is one of the most common, most cost-effective repairs we handle, and it typically lands in the $250 – $500 range. The whole door only becomes the sensible choice when several panels are damaged, the frame or tracks are bent, or the door is old enough that a matching panel no longer exists. A panel replacement beats a new door on cost whenever the door’s structure and opener are still healthy.

When homeowners call us about a hit door, the first thing the technician checks is whether the door still runs level and whether the tracks are square. If the answer is yes, a panel swap gets you back to normal without touching the rest. If the door is binding or the opener is straining, we look at the full picture before recommending anything. Call (855) 529-2078 to get that assessment and a free estimate.

Do You Handle Emergency Panel Replacement?

Yes. A door that’s been hit or is hanging out of its track is a security gap, not just a cosmetic problem, and we offer emergency garage door service for exactly those situations. Panel replacement itself is rarely an after-hours emergency, but a door that won’t close and won’t secure the garage is. We can get it evaluated and stabilized, then schedule the panel work.

We’re closed on Saturdays, but if your door fails then, call anyway: we’ll book you for Sunday. Fast dispatch runs from 7am to 7pm, and same-day service is available for urgent calls. When it’s a bent panel on a door that still closes and locks, there’s no need to rush it; a scheduled visit is fine and keeps the cost predictable.

Brands We Work With for Panel Replacement

Panel fit depends on the brand. Each manufacturer builds its panels to its own tolerances, so we work with the brand you already own rather than a generic replacement. We handle LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor, and we can source a matching panel for most of them. If the manufacturer has discontinued your panel, we’ll say so up front and walk through the close-match options or the door-replacement math honestly.

Brand-specific knowledge matters here more than most homeowners expect. A Clopay panel and a Wayne Dalton panel aren’t interchangeable even when they look similar, and forcing a mismatched panel into a door throws off the balance and strains the opener over time. Working with the right panel for the model is what keeps the door quiet and the opener out of trouble. This is also where door and opener expertise meet: a panel that’s slightly heavier than the original changes the load on the opener, and we account for that.

If you’re not sure what brand your door is, that’s fine. The technician identifies it on arrival from the panel profile, the stamp on the back, or the opener’s model. There’s no need to research it yourself before calling.

Why Choose Pembroke Pines Garage Door Repair Co for Panel Replacement?

We’re a garage door specialist, not a general handyman outfit. Doors, openers and the springs and cables that run them are the whole of what we do, which means panel work connects cleanly to the rest of the system. If your panel damage comes with a track issue or a worn opener, it all gets handled in one visit instead of bouncing between contractors.

What that looks like in practice:

  • Full-lifecycle coverage. Panel replacement, spring repair, opener repair, installation and emergency service all sit under one roof, so there are no handoffs or gaps in the work.
  • Brand fluency. Certified service across eight of the most recognized brands means the technician knows your door’s actual components and tolerances, not a one-size-fits-all approach.
  • Safety-first on every visit. Springs and cables are the highest-risk parts of any door, and our spring repair is a standalone specialty. We never treat them as an afterthought during a panel job, because a door that’s been hit can leave a spring or cable under uneven load.
  • Upfront pricing. You get a written estimate before work begins, and free estimates cost you nothing.
  • Emergency availability. For a door that won’t close, we offer emergency service that general handymen and big-box contractors routinely turn down.

We connect you with experienced technicians who have up to 11 years of experience working on doors and openers from LiftMaster, Chamberlain, Genie, Clopay and the other brands listed above. We can also work with your insurer if a panel was damaged in a storm or collision.

A Word on Safety

Panel replacement itself is low-risk work, but it’s done on a door that holds a lot of stored energy in its springs and cables. That’s why we don’t hand out step-by-step instructions for pulling a panel yourself: the moment you loosen a hinge or work around a tensioned spring or cable, an injury becomes possible, and it isn’t worth the risk to save a labor charge. A trained professional knows how to bring the door down safely, check the spring and cable load, and put it back together so it runs balanced. If your door has a hit panel and you’re unsure whether it’s safe to open, leave it closed and call us.

FAQs – Panel Replacement Cost

How much does panel replacement cost in Pembroke Pines?

Panel replacement in Pembroke Pines typically costs $250 – $500 for a standard single panel, including labor. Bottom impact panels, custom matches and multi-panel jobs push toward the top of that range or slightly above. Call (855) 529-2078 for an exact quote; estimates are free.

Is it cheaper to repair a panel or replace the whole door?

Repair is almost always cheaper when only one or two panels are damaged and the frame and tracks are sound. A single panel runs $250 – $500, while a full new door installation runs $700 – $2200. Call (855) 529-2078 and we’ll tell you honestly which route fits your door.

Can you match my existing panel color and style?

Usually, yes. Common profiles in popular colors often match at the $250 – $500 end, and rare or discontinued panels can cost more and take longer to source. We work across Clopay, Amarr, Wayne Dalton, Raynor and the other major brands to find the closest match. Call (855) 529-2078 to check your door.

Does insurance cover panel replacement?

Sometimes. If a storm or a collision caused the damage, your policy may cover it, and we can work with your insurer on the documentation. Whether you’re covered depends on your policy; the repair itself typically runs $250 – $500. Call (855) 529-2078 for a free estimate you can use with your insurer.

Can you replace a panel the same day?

Often, yes, when a stock panel is in hand and the damage is limited to one section. Same-day service is available and fast dispatch runs from 7am to 7pm, though special-order panels take longer to source. Call (855) 529-2078 to find out what’s possible for your door.

Will one new panel look different from the rest of the door?

It can, especially on an older door where the other panels have faded. A close match is usually possible, and replacing two or three unevenly faded panels together often looks better than one. Expect a single panel to run $250 – $500, with additional panels adding to the job. Call (855) 529-2078 to talk through the options.

Get Your Free Panel Replacement Estimate

A dented panel doesn’t have to mean a new door, and it doesn’t have to be a mystery bill either. We’ll look at the damage, tell you whether one panel will do the job, and give you a written estimate before anything gets touched. Same-day service is available, emergency calls are welcome, and fast dispatch runs from 7am to 7pm. Whether it’s a bent bottom panel, a door off its track or an opener that’s given up, the team at Pembroke Pines Garage Door Repair Co is ready to help. Call (855) 529-2078 for a free estimate, and the local pro we connect you with is licensed and insured as their state requires.

Pricing reflects the Pembroke Pines market as of 2026. Pembroke Pines Garage Door Repair Co offers free estimates – call (855) 529-2078.

What Our Customers Say

★★★★★ 4.8 from 5+ reviews

"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."

- Allison Parker

"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."

- Adriana Delgado

"Good repair, reasonable money. The door still has a slight shudder about a foot from the top that he said is the track being slightly out of true on an old frame and would cost real money to fix properly. Fair enough, but I'd hoped it would be perfect."

- Alejandro Rodriguez
Need Garage Door help in Pembroke Pines? Licensed & insured · 1-hour response · free estimates
Call (855) 529-2078

Request a Free Estimate

Tell us what's going on in Pembroke Pines. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch
Local Service Coverage
Garage Door Repair Pembroke PinesGarage Door Repair MiramarGarage Door Repair Southwest RanchesGarage Door Repair Cooper CityGarage Door Repair Country ClubGarage Door Repair Palm Springs NorthGarage Door Repair DavieGarage Door Repair WestonGarage Door Repair Miami LakesGarage Door Repair Miami GardensGarage Door Repair Hialeah GardensGarage Door Repair PlantationGarage Door Repair Opa-lockaGarage Door Repair Broadview ParkGarage Door Repair Pembroke ParkGarage Door Repair West ParkGarage Door Opener Repair Pembroke PinesGarage Door Opener Repair MiramarGarage Door Opener Repair Southwest RanchesGarage Door Opener Repair Cooper CityGarage Door Opener Repair Country ClubGarage Door Opener Repair Palm Springs NorthGarage Door Opener Repair DavieGarage Door Opener Repair WestonGarage Door Opener Repair Miami LakesGarage Door Opener Repair Miami GardensGarage Door Opener Repair Hialeah GardensGarage Door Opener Repair PlantationGarage Door Opener Repair Opa-lockaGarage Door Opener Repair Broadview ParkGarage Door Opener Repair Pembroke ParkGarage Door Opener Repair West ParkGarage Door Installation Pembroke PinesGarage Door Installation MiramarGarage Door Installation Southwest RanchesGarage Door Installation Cooper CityGarage Door Installation Country ClubGarage Door Installation Palm Springs NorthGarage Door Installation DavieGarage Door Installation WestonGarage Door Installation Miami LakesGarage Door Installation Miami GardensGarage Door Installation Hialeah GardensGarage Door Installation PlantationGarage Door Installation Opa-lockaGarage Door Installation Broadview ParkGarage Door Installation Pembroke ParkGarage Door Installation West ParkGarage Door Spring Repair Pembroke PinesGarage Door Spring Repair MiramarGarage Door Spring Repair Southwest RanchesGarage Door Spring Repair Cooper CityGarage Door Spring Repair Country ClubGarage Door Spring Repair Palm Springs NorthGarage Door Spring Repair DavieGarage Door Spring Repair WestonGarage Door Spring Repair Miami LakesGarage Door Spring Repair Miami GardensGarage Door Spring Repair Hialeah GardensGarage Door Spring Repair PlantationGarage Door Spring Repair Opa-lockaGarage Door Spring Repair Broadview ParkGarage Door Spring Repair Pembroke ParkGarage Door Spring Repair West ParkEmergency Garage Door Pembroke PinesEmergency Garage Door MiramarEmergency Garage Door Southwest RanchesEmergency Garage Door Cooper CityEmergency Garage Door Country ClubEmergency Garage Door Palm Springs NorthEmergency Garage Door DavieEmergency Garage Door WestonEmergency Garage Door Miami LakesEmergency Garage Door Miami GardensEmergency Garage Door Hialeah GardensEmergency Garage Door PlantationEmergency Garage Door Opa-lockaEmergency Garage Door Broadview ParkEmergency Garage Door Pembroke ParkEmergency Garage Door West Park
Call Now - 24/7 Dispatch